ASR9k nV IRL and single control plane options — minimum requirement —
A. 2 IRL link 10G/40/100G layer 1
B.
C. EOBC – 1G link Layer 2
D.
Correct Answer: AC
Explanation/Reference:
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/interfaces/configuration/guide/hc42asr9kbook/hc42clst.html
IRL- L1- 40/100G
EOBC- L2 – 1G
https://supportforums.cisco.com/document/145436/asr9k-nv-edge-deployment-guide
Restrictions of the Cisco ASR 9000 Series nV Edge System
These are some of the restrictions for the Cisco ASR 9000 nV Edge system:
+ The first generation Cisco ASR 9000 Ethernet linecards are not supported.
+ Chassis types that are not similar cannot be connected to form an nV edge system.
+ SFP-GE-S= is the only Cisco supported SFP that is allowed for all inter rack connections.
+ TenGigE SFPs are not supported on EOBC ports.
+ The nV Edge control plane links have to be direct physical connections and no network or intermediate routing or switching devices are allowed in between.
+ The nV Edge system does not support mixed speed links.
+ The nV Edge system does not support the ISM or CGN blade.
. RSP440
. Typhoon Line Card. Trident Line Card or RSP 3G cannot co-exist in the same system
. Requires a cluster software license on each chassis
. 4.2.1 image or above required
. Only like-like chassis supported in 4.2.1. Mixed Chassis Support no yet committed
. Single RSP per chassis is supported but not recommended due to lack of fabric redundancy on the physical chassis.
Explanation/Reference:
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/interfaces/configuration/guide/hc42asr9kbook/hc42clst.html
IRL- L1- 40/100G
EOBC- L2 – 1G
https://supportforums.cisco.com/document/145436/asr9k-nv-edge-deployment-guide
Restrictions of the Cisco ASR 9000 Series nV Edge System
These are some of the restrictions for the Cisco ASR 9000 nV Edge system:
+ The first generation Cisco ASR 9000 Ethernet linecards are not supported.
+ Chassis types that are not similar cannot be connected to form an nV edge system.
+ SFP-GE-S= is the only Cisco supported SFP that is allowed for all inter rack connections.
+ TenGigE SFPs are not supported on EOBC ports.
+ The nV Edge control plane links have to be direct physical connections and no network or intermediate routing or switching devices are allowed in between.
+ The nV Edge system does not support mixed speed links.
+ The nV Edge system does not support the ISM or CGN blade.
. RSP440
. Typhoon Line Card. Trident Line Card or RSP 3G cannot co-exist in the same system
. Requires a cluster software license on each chassis
. 4.2.1 image or above required
. Only like-like chassis supported in 4.2.1. Mixed Chassis Support no yet committed
. Single RSP per chassis is supported but not recommended due to lack of fabric redundancy on the physical chassis.