Hotspot Questions Why has the Branch3 router lost connectivity with R1? Use only show commands to troubleshoot because usage of the debug command is restricted on the Branch3 and R1 routers. A. A PPP chap hostname mismatch is noticed between…
Hotspot Questions Which statement about the router configurations is correct? A. PPP PAP is authentication configured between Branch2 and R1. B. Tunnel keepalives are not configured for the tunnel0 interface on Branch2 and R2. C. The Branch2 LAN network 192.168.11…
Hotspot Questions Why did Branch1 router lose WAN connectivity with R1 router? A. The IP address is misconfigured on PPP multilink interface on the Branch1 router. B. The PPP multilink group is misconfigured on the anch1 serial interfaces C. The…
While you were troubleshooting a connection issue, a ping from one VLAN to another VLAN on the same switch failed. Which command verifies that IP routing is enabled on interfaces and the local VLANs are up? A. show ip interface…
Scenario Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and…
Scenario Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and…
Hotspot Questions A. R1 ethernet0/1 is shutdown. Configure the no shutdown command. B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25, configure no ip ospf hello interval 25 C. R2 ethernet0/1 and R3 ethernet0/0 are configured with…
Which option describes a difference between EIGRP for IPv4 and IPv6? A. Only EIGRP for IPv6 advertises all connected networks. B. Only EIGRP for IPv6 requires a router ID to be configured under the routing process- C. AS numbers are…
What is the best way to verify that a host has a path to other hosts in different networks? A. Ping the loopback address. B. Ping the default gateway. C. Ping the local interface address. D. Ping the remote network.
If host Z needs to send data through router R1 to a storage server, which destination MAC address does host Z use to transmit packets? A. the host Z MAC address B. the MAC address of the interface on R1…