A company must automate a set of complex changes aligned with DR testing in the network. These changes are specific, and the DR playbook will be adjusted in the future. The playbook has diverse routing and switching assets in scope…
DRAG DROP Drag and drop the characteristics from the left onto the configuration protocols they describe on the right. Select and Place:
An engineer uses Postman and YANG to configure a router with: OSPF process ID 400 network 192.168.128.128/25 enabled for Area 0 Which get-config reply verifies that the model set was designed correctly? A. B. C. D.
Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery? A. bootstrap router B. Anycast-RP C. Auto-RP D. static RP
An organization plans to deploy multicast across two different autonomous systems. Their solution must allow RPs to: discover active sources outside their domain use the underlying routing information for connectivity with other RPs announce sources joining the group Which solution…
An engineer is designing a multicast network for a company specializing in VoD content. Receivers are across the Internet, and for performance reasons, the multicast framework must be close to the receivers within each AS. For high availability, if the…
An engineer must design an in-band management solution for a customer with branch sites. The solution must allow remote management of the branch sites using management protocols over an MPLS WAN. Queueing is implemented at the remote sites using these…
The customer solution requires QoS to support streaming multimedia over a WAN. An architect chooses to use Per-Hop Behavior. Which solution should the engineer use to classify and mark traffic traveling between branch sites? A. CBWFQ with DSCP AF2 B.…
An engineer must design a QoS solution for a customer that is connected to an ISP over a 1Gbps link with a 100Mbps CIR. The ISP aggressively drops all traffic received over the CIR, which is causing numerous TCP retransmissions.…
An architect must address sustained congestion on the access and distribution uplinks of a network. QoS has already been implemented and optimized, but it is no longer effective in ensuring optimal network performance. Which two solutions should the architect use…