Refer to the exhibit. EIGRP a running across the core lo exchange Internal routes, and each router maintains 6GP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2…
Refer to the exhibit. A network engineer must meet these requirements to provide a connects, solution: The customer connected to Area 2 needs to access the application in Area 1 on the 10.10.10.0/24 subnet The Customer must not have access…
Refer to me exhibit. An engineer started lo configure a router for OSPF. Which configuration must me engineer perform on me router without changing any interface configuration so that the router establishes an OSPF neighbor relationship with its peer? A.…
When Cisco lOS XE REST API uses HTTP request methods what is the purpose of a PUT request? A. retrieves the specified resource or representation B. submits data to be processed to the specified resource C. updates the specified resource…
A network administrator is planning a new network with a segment-routing architecture using a distributed control plane. How is routing information distributed on such a network? A. Each segment is signalled by an SR controller, but each segment makes Its…
Refer to the exhibit. An organization s network recently experienced several significant outages due to device failures. The network administrator just moved the network devices to a new central data center, and packets are switched using labels. The administrator Is…
Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays? A. routing and tunneling when doing symmetric IRB B. routing when doing asymmetric IRB C. routing and bridging when doing asymmetric IRB D. bridging when doing symmetric…
A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1 The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP…
Refer to the exhibit A network engineer is in the process of implementing IS-IS Area 1 and Area 2 on this network to segregate traffic between different segments of the network The hosts in the two new areas must maintain…
An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements; The switchport must tag all trame when it enters the port The switchport Is expected to provide the same level of service to traffic from any…