Which three mechanisms are used to implement MPLS TE?
Which three mechanisms are used to implement MPLS TE? (Choose three.) A. tunnel interface B. CSPF C. RSVP D. LDP E. MP-BGP
642-889
When implementing MPLS TE tunnels on Cisco IOS XR routers, what is the tunnel setup and hold priority value range, and which value has the highest priority?
When implementing MPLS TE tunnels on Cisco IOS XR routers, what is the tunnel setup and hold priority value range, and which value has the highest priority? A. 0-63, where 0 is the highest priority B. 0-63, where 63 is…
What is an important requirement with MPLS applications like Layer 3 MPLS VPNs?
What is an important requirement with MPLS applications like Layer 3 MPLS VPNs? A. All the PE routers loopback addresses should be summarized to reduce the number of routing table entries in the core routers. B. Targeted hellos are required…
Which statement is correct?
Referring to the traceroute output exhibit that is shown, which statement is correct? A. There is no problem with the end-to-end LSP as indicated by the successful trace. B. Normal PHP operation is performed by the hop 4 router. C.…
Why is this?
On the Cisco IOS XR, when using the match protocol command within a class-map to classify traffic, you noticed that the match protocol option on the Cisco IOS XR shows much fewer protocol options than on the Cisco IOS or…
Which mechanism protects the router resources by filtering and policing the packets flows that are destined to the router that is based on defined flow-type rates?
On a Cisco IOS XR router, which mechanism protects the router resources by filtering and policing the packets flows that are destined to the router that is based on defined flow-type rates? A. LLQ B. LPTS C. Committed Access Rate…
Which field in the MPLS shim header is used to support different QoS markings?
Which field in the MPLS shim header is used to support different QoS markings? A. IP precedence B. DSCP C. EXP D. ToS E. S F. Label
Which bandwidth pool(s) and class type(s)?
DS-TE implementations on Cisco routers support which bandwidth pool(s) and class type(s)? (Choose two.) A. global pool only B. subpool only C. global pool and subpool D. class-type 0 only E. class-type 1 only F. class-type 0 and class-type 1
Which statement is correct regarding the pseudowire on connects PE7 to the 10.8.1.1 neighbor?
Which statement is correct regarding the pseudowire on connects PE7 to the 10.8.1.1 neighbor? A. The control word is enabled on both ends of the pseudowire B. The MTU size is 1500 bytes on both ends of the pseudowire C.…
Which three statements are correct regarding the MPLS VPN configurations used to support the connectivity between the CE7 and CE8 sites?
On PE7, which three statements are correct regarding the MPLS VPN configurations used to support the connectivity between the CE7 and CE8 sites? (Choose three.) A. The RD is 1:1 B. The import and export RTs are 1:1 C. Interface…