DRAG DROP 07/01/2019 – by Mod_GuideK 2 DRAG DROP Drag and drop the port type from the left onto the correct description on the right. Select and Place: SHOW ANSWERSCorrect Answer: Explanation/Reference:
This answer is incorrect. Should be in order from top to bottom: 1. Console 2. CMP 3. Mgmt0 = Out of Band telnet/ssh 4. SVI = In Band References: This Cisco Press “Connecting to the Management Network and Securing Access” .pdf basically has this exact same table on pages 2 and 3: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/best_practices/cli_mgmt_guide/cli_mgmt_bp/connect.pdf Reply
This answer is incorrect. Should be in order from top to bottom: 1. Console 2. CMP 3. Mgmt0 = Out of Band telnet/ssh 4. SVI = In Band References: This Cisco Press “Connecting to the Management Network and Securing Access” .pdf basically has this exact same table on pages 2 and 3: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/best_practices/cli_mgmt_guide/cli_mgmt_bp/connect.pdf Mgmt0: This Nexus 5000 page explicitely defines mgmt0 as out of band: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/initconfig.html “About the mgmt0 Interface: The mgmt0 interface on Cisco NX-OS devices provides out-of-band management, which enables you to manage the device by its IPv4 or IPv6 address.” Reply
This answer is incorrect. Should be in order from top to bottom:
1. Console
2. CMP
3. Mgmt0 = Out of Band telnet/ssh
4. SVI = In Band
References:
This Cisco Press “Connecting to the Management Network and Securing Access” .pdf basically has this exact same table on pages 2 and 3:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/best_practices/cli_mgmt_guide/cli_mgmt_bp/connect.pdf
This answer is incorrect. Should be in order from top to bottom:
1. Console
2. CMP
3. Mgmt0 = Out of Band telnet/ssh
4. SVI = In Band
References:
This Cisco Press “Connecting to the Management Network and
Securing Access” .pdf basically has this exact same table on pages 2 and 3:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/best_practices/cli_mgmt_guide/cli_mgmt_bp/connect.pdf
Mgmt0: This Nexus 5000 page explicitely defines mgmt0 as out of band: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/initconfig.html
“About the mgmt0 Interface: The mgmt0 interface on Cisco NX-OS devices provides out-of-band management, which enables you to manage the device by its IPv4 or IPv6 address.”