BGP, OSPF and RIP are interior gateway protocols supported by ExtremeWare.
BGP, OSPF and RIP are interior gateway protocols supported by ExtremeWare. A. TRUE B. FALSE
BGP, OSPF and RIP are interior gateway protocols supported by ExtremeWare. A. TRUE B. FALSE
What is the meaning of the following CLI command: con ipr a bl 10.11.12.0/24? A. Configure a blackhole route that blocks traffic destined to the 10.11.12.0/24 network. B. Configure a default route that forwards traffic destined to the 10.11.12.0/24 network.…
The default settings for the console port of an ?chipset switch are: 9600 bps/8 data-bits/one stop-bit/no parity/software flow control A. TRUE B. FALSE
The Alpine series switches are provided with a passive backplane. A. TRUE B. FALSE
What happens if the following CLI command is executed? create fdbentry 00:E0:2B:12:34:56 vlan corporate port 4 A. Adds a temporary static entry to the FDB B. Adds a permanent static entry to the IPFDB C. Adds a permanent static entry…
What is the well-known port number for Telnet? A. 25 B. 110 C. 22 D. 23
In an Extreme switch, if MAC address learning is disabled on a port, no traffic destined to a permanent MAC address matching that port number will be forwarded, not even broadcast traffic. A. TRUE B. FALSE
If you change and then forget the only remaining password for the CLI Administrator account ability to log on to an Extreme switch, how can you recover the password without loosing the configuration? A. Provide dial-up, modem access to the…
What is the maximum number of IP host addresses that fit in this network 172.168.128.96/27? A. 14 B. 30 C. 62 D. 254
The OSPF Area 0.0.0.0 is always pre-configured on an Extreme switch as a ___________ area type. A. Stub B. NSSA C. Normal D. None of these