Hotspot Question
Answer: ip route 0.0.0.0 0.0.0.0 s0/0/0
Explanation:
In order to allow the network of 192.168.1.0/24 to access Server 1, we need to establish a default route. The format of this default route is as follows:
ip route prefix mask {ip-address interface-type interface-number [ip-address]} [distance] [name]
[permanent track number] [tag tag]
Based on the request of this subject, we need to configure the correct route as follows:
ip route 0.0.0.0 0.0.0.0 s0/0/0
Answer: 3
Explanation:
We believe the correct answer is 3 because the packet will be encapsulated in one more frame sent between routers R1 and R2. Source MAC is interface S0/0/0 on router R1 and destination is the serialinterface on router R2.
Answer: On router R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.1.10
Explanation:
In order to allow internet users to access Web Server 2, we need to configure NAT address translation on router R1.
Answer: 255.255.255.0
Explanation:
1. Based on the information provided in the exhibit, we know that the IP address of the interface Fa0/0 is 192.168.1.250/24, that is to say the subnet mask is 255.255.255.0??
2. When configuring the correct IP address and not wasting IP address, the network of 192.168.1.0 needs to contain the following three IP addresses of interfaces:
R1(fa 0/0) : 192.168.1.250
Host 1: 192.168.1.106/24
Web server 2: 192.168.1.10/24
The correct mask is 255.255.255.0.
Pass Cisco CCNA 200-301 Exam in First AttemptFULL Printable PDF and Software. VALID exam to help you pass. |