Scenario
The following four questions concern the Nexus 7010’s which are configured as a vPC pair at the core of a Data Center network. You can utilize all the available show commands to answer the questions. Access to the running-configuration is not allowed.
Instructions
Enter NX-OS commands on 7K-3 and 7K-4 to verify network operation and answer four multiple-choice questions.
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click on the switch to gain access to the console of the switch. No console or enable passwords are required.
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Without having access to Fabric Path show commands, how can you confirm whether Fabric Path is configured on the two vPC peer 7K-3 and 7K-4?
A. Show vpc would not indicate any downstream virtual port channel vPC parameter with active VLANs
B. Show vpc role on both 7K-3 and 7K-4 would indicate their role as primary
C. Show interface would indicate port-channel 1 and 2 would use a port mode of Fabric path 0.
D. Show hsrp would be blank, since FHRP is not supported or required when using Fabric Path
