Home » Cisco » 350-080 » How many IP addresses are required to configure full remote access via management 0?
In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management 0?
A. Two IP addresses, one for each supervisor
B. Three IP addresses, one virtual IP and one physical IP for each supervisor
C. One IP address that is shared among supervisors
D. None — management 0 will use the IP address from the first SVI that is created
Correct Answer: C
Explanation/Reference:
Explanation:
Fully redundant switch contains two supervisor modules. If these modules are Supervisor 1 modules, they each have a CMP. Although only one supervisor module is active at any one time, the CMP software in each supervisor module is always active. For a high-availability configuration, you should connect four Ethernet cables to these supervisor modules — one for each other 0 interface and one for each cmp-mgmt interface. You should also configure three IP addresses — one for each cmp-mgmt interface and one that is shared between the active and standby supervisor other 0 interfaces.
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/qa_c67-556624.html
