Which statement is correct about defining a Route Distinguisher (RD) for a VPN instance on an HP Comware switch? A. The RD is only required when the router runs Border Gateway Protocol (BGP) and must match the BGP router ID.…

What is the relationship between a Forwarding Equivalence Class (FEC) and the MPLS label that a Label Switching Router (LSR) advertises for that FEC? A. An LSR assigns the same label to FECs with the same best next hop: labels…

A company merger created a situation in which some network segments are using overlapping IP addresses. Administrators want to keep the overlapping addresses and isolate the segments. A core router connects to devices in both segments and routes some traffic…

Refer to the exhibit An MPLS Layer 2 VPN is being implemented between Sites 1 and 2. The administrator wants PE-1 and PE-2 to set up the Virtual Circuit (VC) dynamically by using the Martini method. What is required to…

Refer to the exhibit SPBM is being implemented on the backbone links shown in the exhibit. The servers in VLAN 10 (10.1.10.0/24) should be able to communicate at Layer 2 across the backbone. In the vsi section of the configuration…

What is the correct use case for implementing priority flow control (PFC) on a switch port? A. The port carries data and storage traffic. PFC should be applied to the priority queue that is assigned to storage traffic. B. The…

An administrator is implementing MDC and wants to create a redundant solution where each MDC uses two physical HP Comware switches. What is the correct setup process? A. Set up the MDCs on both switches. Configure Intelligent Resilient Framework (IRF)…

Refer to the exhibit An administrator is creating the EVI network shown in the exhibit Switches 1 and 2 are configured as ENDP servers. and Switch 3 is configured as an ENDP client to the ENDP servers. Which configuration is…

An HP IRF virtual switch with two members is implementing TRILL. The administrator wants to ensure that the master can fail without causing topology changes or changes in forwarding tables in the TRILL region. Which setting helps support this requirement?…

Refer to the exhibit An administrator wants these switches to establish a TRILL region TRILL is enabled globally and nicknames are set. What must the administrator do so that each TRILL switch (RBridge) finds the best path to all other…