What must an OSPF router do when it receives a link state update? A. It must participate in a new election for the Designated Router and Backup DR. B. It must initiate a graceful restart timer. C. It must re-establish…
Refer to the exhibit. A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated link should forward the packet? A. The standby…
Refer to the exhibit. Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shows in the exhibit on Switch-1.…
A customer wants access layer switches that support routing, ACLs, backplane stacking, and Smart rate ports. The customer asks about Aruba 5400R z 12 switches. Which Aruba Switch model would better meet the customer’s requirements? A. 2530 B. 2930F C.…
A network administrator enters this command: Switch(config)# aaa authorization user-role enable How does this affect device authentication? A. The local manager and operator accounts will no longer work unless they are associated with a user role on the switch. B.…
A company wants to implement RADIUS authentication of all managers who log in to AOS-Switches via SSH. The RADIUS server also sends VSAs that indicate which commands users can enter, and switches must honor these. What must the administrator do…
A company wants to implement role-based tunneled node on AOS-Switches. Which solution should be included in the plan to help apply the roles? A. a RADIUS server, such as Aruba ClearPass B. an SNMP server, such as Aruba AirWave C.…
Refer to the exhibit. Both Switch-1 and Switch-2 redistribute RIP routes into OSPF. The network administrator wants routers in Area 1 to receive the redistributed routes from Switch-1 but not from Switch-2. What should the administrator do to achieve this…
A network administrator needs to configure PIM across several AOS-Switches in the same routing domain. What correctly describes how they can implement PIM modes? A. Switches at the network edge should run PIM-SM, while switches at the network core should…
Network administrators need to inspect all traffic that arrives on an AOS-Switch in VLAN 2 and is destined to TCP ports 50000-50010. They want to send the traffic to a protocol analyzer connected to the switch for deeper inspection. What…