SIMULATION

SIMULATION
Configure HSRP between DISTRO-SW1 and DISTRO-SW2 on VLAN 100 for hosts connected to ACCESSSW1 to achieve these goals:
1. Configure group number 1 using the virtual IP address of 192.168.1.1/24.
2. Configure DlSTRO-SW1 as the active router using a priority value of 110 and DISTRO-SW2 as the standby router.
3. Ensure that DISTRO-SW2 will take over the active role when DISTRO-SW1 goes down, and when DISTRO-SW1 recovers, it automatically resumes the active role.






DISTRO-SW2


A. See the solution below in

Correct Answer: A
Explanation/Reference:
Explanation:
DISTRO-SW1
Sw1
int vlan 100
standby 1 ip 192.168.1.1
standby 1 priority 110
standby 1 preempt
copy run start
DISTRO-SW2
SW2
int vlan 100
standby 1 ip 192.168.1.1
standby 1 preempt
copy run start
OR
MINOR CHANGE IN ABOVE HSRP SCENERIO

Check the IP address 1.254 check the minimum 15 seconds solution get change.
DISTRO-SW1
Sw1 int vlan 100
glbp 1 ip 192.168.1.254
glbp 1 priority 110
glbp 1 timers 5 15
glbp 1 preempt
copy run start
DISTRO-SW2
SW2
int vlan 100
glbp 1 ip 192.168.1.254
glbp 1 timers 5 15
glbp 1 preempt
copy run start

350-401: Implementing Cisco Enterprise Network Core Technologies (ENCOR) Free dumps for 350-401 in PDF format. High quality 350-401 PDF and software. VALID exam to help you pass.