What configuration is required, and what other changes will need to be made?

A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required, and what other changes will need to be made? (Choose two.)
VSM-PRI-188# 61thern vethernet 5
Vethernet5 is up
Port description is VM001, Network Adapter 2
HardwarE. Virtual, address: 0050.56b0.001e (bia 0050.56b0.001e)
Owner is VM “VM001”, adapter is Network Adapter 2
Active on module 5
Vmware DVS port 484
Port-Profile is VM-vlan-10
Port mode is access
VSM-PRI-188# 61thern vethernet 6
Vethernet6 is up
Port description is VM002, Network Adapter 1
HardwarE. Virtual, address: 0050.56b0.0020 (bia 0050.56b0.0020)
Owner is VM “VM002”, adapter is Network Adapter 1
Active on module 5
Vmware DVS port 485
Port-Profile is VM-vlan-10
Port mode is access
A. Monitor session 1 type span
Source interface veth5 both
Destination interface veth6
No shut
B. monitor session 1
source vlan 10
destination interface veth6
no shut
C. monitor session 1 type er-span
source interface vlan 10
destination ip 10.1.1.10
no shut
D. VM002 must be removed from the Nk1V
E. Move VM002 to Module 5
F. Restart the VEM on module 5

cisco-exams

Leave a Reply

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.