What is the correct statement below after examining the R1 routing table?

Hotspot Question – RIPv2 Troubleshooting

– Router R1 connects the main office to internet, and routers R2 and R3 are internal routers
– NAT is enabled on Router R1
– The routing protocol that is enabled between R1, R2 and R3 is RIPv2
– R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1
– Server1 and Server 2 are placed in VLAN 100 and 200 respectively, and are still running on stick Configuration with router R2.
You have console access on R1, R2, R3 and L2SW1 devices.
Use only show commands to troubleshoot the issues.
What is the correct statement below after examining the R1 routing table?
A. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2
Because the static route AD that is configured is less than the AD of RIPv2
B. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route
Because the static route AD that is configured is higher than the AD of RIPv2
C. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2
But the traffic is forwarded to the ISP instead of the internal network.
D. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route
Because the static route AD that is configured is 255

Pass Cisco CCNA 200-301 Exam in First Attempt FULL Printable PDF and Software. VALID exam to help you pass.