What need to be done to make the group function properly?

Hotspot – HSRP
Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs to corporate servers. The distribution switches are configured to use HSRPto provide a high availability solution.
-DSW1 -primary device for VLAN 101 VLAN 102 andVLAN 105
-DSW2 – primary device for VLAN 103 and VLAN 104
-A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to investigate and respond to the following question.

During routine maintenance, it became necessary to shutdown G1/0/1 on DSW1. All other interface were up. During this time, DSW1 remained the active device for VLAN 102’s HSRP group. You have determined that there is an issue with the decrement value in the track command in VLAN 102’s HSRP group. What need to be done to make the group function properly?
A. The DSW1’s decrement value should be configured with a value from 5 to 15.
B. The DSW1’s decrement value should be configured with a value from 9 to 15.
C. The DSW1’s decrement value should be configured with a value from 11 to 18.
D. The DSW1’s decrement value should be configured with a value from 195 to less than 205.
E. The DSW1’s decrement value should be configured with a value from 200 to less than 205.
F. The DSW1’s decrement value should be greater than 190 and less 200.