Home » HP » HP2-Z12 » Which HP V Series switch can connect to a redundant power supply (RPS)?
Which HP V Series switch can connect to a redundant power supply (RPS)?
A. V1910-24G-PoE (365W)
B. V1905-24-PoE
C. V1810-8G
D. V1410-8G
Correct Answer: A
Explanation/Reference:
Module 9 — HP V Series Switch Hardware
HP V Series External RPS
The HP V1919-24G-PoE(365W) switch can receive power from a HP RPS 1000 A3 Redundant Power Supply, one of the RPSs that you already learned about with the A Series switches. The RPS 1000 A3 is the only RPS supported for this switch. You must also use the correct cable to connect the switch to the RPS; the slide displays the specifications.
The switch has both an AC and DC power input. You can connect one or both, for redundancy. When operating at is capacity, the V1910 -24G-PoE
(365W) switch draws:
AC power:
• 523 W for system power
• 365 W for PoE
DC power
• 92 W for system power
• 740 W for PoE
The V1910 -24G-PoE(365W)switch provides an RPS Status LED directly above the Mode button and Mode Status LED. Look at this LED to discover whether the switch is successfully receiving power from the RPS (LED glows solid green) or whether the switch is not receiving power or the DC input is abnormal (LED is off).
Download Printable PDF. VALID exam to help you PASS.
|
|