Which ports on the Cisco UCS 6120XP Fabric Interconnects can operate at either 1 Gb/s or 10 Gb/s?
A. Ports 1-4
B. None
C. Ports 1-6
D. Ports 1-8
E. Ports 17-20
Which ports on the Cisco UCS 6120XP Fabric Interconnects can operate at either 1 Gb/s or 10 Gb/s?
A. Ports 1-4
B. None
C. Ports 1-6
D. Ports 1-8
E. Ports 17-20
Cisco UCS 6120XP
Correct is D
There are 20 to 28 ports on the Cisco UCS 6120XP, depending on which expansion module is installed.
The fixed ports form group 1 and are named 1/port_number. Ports 1 through 20 are unencrypted Ethernet
ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports.
Group 2 includes the ports in the expansion module or modules. Group 2 ports 1 through 4 are Ethernet ports.
Group 2 ports 5 through 8 are Fibre Channel ports.
Note Only group 1 ports 1 through 8 can be configured as 1-Gigabit Ethernet ports. You can use any of these
ports (1 through 8) as a destination port in a monitoring session. Do not attempt to use any other ports
as a destination port for a monitoring session.
Correct is D
Please check page 5
“20 fixed Small Form-Factor Pluggable (SFP+) 10 Gigabit Ethernet ports (up to 8 can be 1 Gigabit Ethernet SFP)”
https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/spec_sheet_c17-665945.pdf
I think the answer is A
Expansion modules allow Cisco UCS 6100 Series Fabric Interconnect to be configured as cost-effective 10-Gigabit Ethernet fabric interconnects and as I/O consolidation platforms with native Fibre Channel connectivity. The Cisco UCS 6120XP has one slot for an optional uplink expansion module. The Cisco UCS 6140XP has two slot for an optional uplink expansion module. There are several modules that can be accommodated in this slot:
•N10-E0440 provides 4 10G SFP+, and 4 Fibre Channel 1/2/4G SFP-based uplink connections. The 10GE ports are encryption capable.
•N10-E0600 provides 6 10G SFP+ based uplink connections.
•N10-E0080 provides 8 1/2/4 G Fibre Channel, SFP-based uplink connection.
•N10-E0060 provides 6 8/4/2/1 G Fibre Channel uplink connections
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/switch/install/ucs6100_install/overview.pdf