Which series of commands will configure router R1 for LAN-to-LAN communication with router R2?
The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP. (Choose three.)
A. R1(config)# interface ethernet 0
R1(config-if)# ip address 192.1.1.129 255.255.255.192
R1(config-if)# no shutdown
B. R1(config)# interface ethernet 0
R1(config-if)# ip address 192.1.1.97 255.255.255.192
R1(config-if)# no shutdown
C. R1(config)# interface serial 0
R1(config-if)# ip address 192.1.1.4 255.255.255.252
R1(config-if)# clock rate 56000
D. R1(config)# interface serial 0
R1(config-if)# ip address 192.1.1.6 255.255.255.252
R1(config-if)# no shutdown
E. R1(config)# router rip
R1(config-router)# network 192.1.1.4
R1(config-router)# network 192.1.1.128
F. R1(config)# router rip
R1(config-router)# version 2
R1(config-router)# network 192.1.1.0
