Home » Cisco » 350-080 » Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true?
Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true?
A. A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces.
B. SAN port channels can include up to 16 interfaces.
C. SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
D. The links in SAN port channels can be connected to different sets of switches.
E. The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.
Correct Answer: E
Explanation/Reference:
Explanation:
You can configure each SAN port channel with a channel group mode parameter to determine the port channel protocol behavior for all member ports in this channel group. The possible values for a channel group mode are as follows:
On (default) — The member ports only operate as part of a SAN port channel or remain inactive. In this mode, the port channel protocol is not initiated. However, if a port channel protocol frame is received from a peer port, the software indicates its nonnegotiable status. Port channels configured in the On mode require you to explicitly enable and disable the port channel member ports at either end if you add or remove ports from the port channel configuration. You must physically verify that the local and remote ports are connected to each other.
Active — The member ports initiate port channel protocol negotiation with the peer port(s) regardless of the channel group mode of the peer port. If the peer port, while configured in a channel group, does not support the port channel protocol, or responds with a nonnegotiable status, it will default to the On mode behavior. The Active port channel mode allows automatic recovery without explicitly enabling and disabling the port channel member ports at either end.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/b_Cisco_Nexus_5000_Series_NXOS_
SAN_Switching_Configuration_Guide/Cisco_Nexus_5000_Series_NX-OS_SAN_Switching_Configuration_Guide_chapter7.html