Home » Cisco » 350-080 » Which three prerequisites must be met before configuring FabricPath on a Cisco Nexus 7000 switch?
Which three prerequisites must be met before configuring FabricPath on a Cisco Nexus 7000 switch? (Choose three.)
A. Ensure that the Enhanced Layer 2 license is installed on the switch.
B. The FabricPath feature set must be installed on the default and non-default VDCs.
C. Spanning tree must be disabled on the switch.
D. Ensure that you are working on the F Series module.
E. Ensure that you are working on the M Series module.
F. The FabricPath feature set must be installed only on the default VDC.
Correct Answer: ABD
Explanation/Reference:
Explanation:
FabricPath forwarding has the following prerequisites:
You should have a working knowledge of Classical Ethernet Layer 2 functionality.
You must install the FabricPath feature set in the default and nondefault VDC before you enable FabricPath on the switch. See the Configuring Feature Set for FabricPath for complete information on installing and enabling the FabricPath feature set.
The FabricPath feature set operation might cause the standby supervisor to reload if it is in an unstable state, such as following a service failure or powering up.
You are logged onto the device.
Ensure that you have installed the Enhanced Layer 2 license.
You are in the correct virtual device context (VDC). A VDC is a logical representation of a set of system resources. You can use the switchto vdc command with a VDC number.
You are working on the F Series module.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/fabricpath/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OSFP-Configuration-Guide-6x/b-Cisco-Nexus-7000-Series-NX-OS-FP-Configuration-Guide-6x_chapter_011.html#reference_30D28E8661BB4CE78ED56E7EE99DF477