Which two components must an engineer configure before configuring SIP route pattern? (Choose two.)
A. route filter
B. SIP trunk
C. route partition
D. calling search space
E. SIP profile
Which two components must an engineer configure before configuring SIP route pattern?
Sip profile is needed for sip trunk. SIP Profile is implicitly must.
B & C
If you visit CUCM you will note that SIP Trunk (has a SIP Profile configured on it – so this is a SIP trunk requirement not SIP Route PATTERN). Instead when you create this SIP Trunk or Route List are compulsory, route partition is also needed but not compulsory as you can also opt for None.
PERCY,
Correct answers are B&E if you check the configuration link :
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.pdf
It mentioned about SIP Route Patterns Configuration Tips
Before you begin, ensure at least one SIP Profile and SIP trunk are configured before you can configure a SIP
route pattern.
route partition is a optional Field in the Configuration is only for restrict access to the SIP route pattern.
From the link, BE are correct.
Tips About Configuring SIP Route Patterns
Before you begin, ensure at least one SIP Profile and SIP trunk are configured before you can configure a SIP route pattern.