You are a Voice Engineer working at ABC Company. You are asked to configure Cisco Unified Border Element in Cisco Unified Communications Manager. Which two configurations are required? (Choose two.)
A. Configure a SIP profile with Early Offer support for voice and video calls; insert MTP as needed.
B. Change the SIP trunk security profile to a nonsecure SIP trunk profile.
C. Under the SIP information configuration, set the destination port to 5061.
D. Bind the SIP signaling to the Cisco Unified Border Element interface.
E. Configure dial peers on Cisco Unified Border Element for inbound and outbound calls appropriately.
I agree A-B
Steps for configuring CUCM to CUBE:
– A SIP trunk must be defined that points to CUBE
-SIP profile for Early Offer needs to be configured, set Early Offer support for voice and video calls to Mandatory (insert MTP if needed)
-Set Early Offer support for voice and video calls to Mandatory (insert MTP if needed)
I think Correct answers are A&B :
according the documentation in the steps 4 amd from
The CUCM-Side of the CUCM-to-CUBE Integration:
4.-The SIP profile for Early Offer is often needed when you connect the CUBE to a provider. If the trunk connects to another Cisco device, then you might not want to select the Media Transport Protocol (MTP) insert, based on the far-end devices. This image shows the SIP profile location and where to select the box for Early Offer.
5.-it might be necessary to change from TCP/UDP for the protocol within the SIP security profile based on the call flow. In order to make this change, navigate to SIP Trunk Security Profiles > Non Secure SIP Trunk Profile:
I think A & E http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/117300-configure-cube-00.html#anc6
The Question state that you need to configure CUBE in CUCM and dial peers are configured on CUBE. So I think E is not an option.