A company has requested that a plan for Auto Deploy be built using VMware- recommended best practices for networking.
Which two considerations adhere to VMware-recommended networking best practices for Auto Deploy? (Choose two.)
A. Using IPv4 as Auto Deploy willbe able to boot hosts with a legacy BIOS.
B. Using DHCP reservations for address allocations because providing fixed IP addresses through host customization is not supported.
C. Using VLANs on the management network as it offers increased performance while hosts are booting.
D. Using IPv6 as Auto Deploy will be able to boot hosts with a legacy BIOS and UEFI.
E. Using DHCP reservations for address allocations because providing fixed IP addresses through host customization is not recommended.
AE
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.install.doc/GUID-980D9E38-633E-4557-9144-AC422FA239C5.html
Because vSphere Auto Deploy takes advantage of the iPXE infrastructure, if the hosts that you plan to provision with vSphere Auto Deploy are with legacy BIOS, the vSphere Auto Deploy server must have an IPv4 address. PXE booting with legacy BIOS firmware is possible ONLY over IPv4. PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
A E
Because vSphere Auto Deploy takes advantage of the iPXE infrastructure, if the hosts that you plan to provision with vSphere Auto Deploy are with legacy BIOS, the vSphere Auto Deploy server must have an IPv4 address.
PXE booting with legacy BIOS firmware is possible only over IPv4.
PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
AE
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.install.doc/GUID-980D9E38-633E-4557-9144-AC422FA239C5.html