Which two information points should a pre-site survey questionnaire contain?

8 thoughts on “Which two information points should a pre-site survey questionnaire contain?”

1. How can you survey for a site unless you know what you are surveying for.

   The list if clients used (endpoint and client devices in the wireless network) are important.

   This is bad or incomplete question. All of these are valid.

   A. list of clients used
   B. hours during which the survey can be performed
   D. approximate square footage of facility

   Reply

2. As if the Cisco manual wasn’t enough, the VCE Plus guide also has it as BD.

   Reply

3. BD
   Quick Reference Manual
   Make sure to complete your customer questionnaire during the meeting. The general information area contains practical information such as the following:
   • Number of sites to survey, number of buildings per site, number of floor per building, with approximate square footage.
   • Local contact details for each site, hours of operations (and hours during which the survey can be performed).
   • The local contact should also be used if security clearance is needed for specific areas.
   • Is there any hazardous area requiring specific attire? Do any areas require specific access tools (ladders or cherry pickers for high ceilings or above-shelf temporary placement)?

   Reply

4. BD for me

   Reply

5. from the Cisco manual its:

   Hours to be performed
   approx sq footage

   Reply

6. I’d say A & D

   https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html

   Prepare for the Survey
   Use this checklist to help you prepare your survey.

   Identify Primary Requirements:

   RF application needs (voice, data, location, etc.)
   Type of facility
   Type of client devices
   Industry vertical
   Customer questionnaire

   Reply

   1. Agreed

      Reply

7. I think B and C

   Reply