Instructions
Enter IOS commands on the device to verify network operation and answer the multiple-choice questions.
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click the device icon to gain access to the console of the device. No console or enable passwords are required.
To access the multiple-choice questions, click the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task. Be sure to answer all four questions before clicking Next button.
Scenario
You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the Internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward Internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
Why applications that are installed on PC’s in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
A. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1 network.
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Server1 network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 LAN network.
D. A standard ACL statement that is configured on R1 is blocking traffic sourced from R2 LAN network.
Pass Cisco CCNA 200-301 Exam in First AttemptFULL Printable PDF and Software. VALID exam to help you pass. |
 |
