Home » Oracle » 1z0-499 » Identify three required tasks to configure a ZFS Storage Appliance cluster.
Identify three required tasks to configure a ZFS Storage Appliance cluster.
A. Cable the cluster serial interconnect controllers.
B. Cable each appliance’s HBAs to the shared JBOD.
C. Perform the initial tty-based configuration on one node.
D. Cable the cluster interconnect controllers.
E. Perform the initial tty-based configuration on both nodes.
F. Cable the primary appliance’s HBAs to the shared JBOD.
G. Cable the cluster Ethernet interconnect controllers.
Correct Answer: BCD
Explanation/Reference:
Configuring Clustering
1. Connect power and at least one Ethernet cable to each appliance.
2. (D) Cable together the cluster interconnect controllers as described below under Node Cabling. You can also proceed with cluster setup and add these cables dynamically during the setup process.
3. (B)Cable together the HBAs to the shared JBOD(s) as shown in the JBOD Cabling diagrams in the setup poster that came with your appliance.
4. (C)Power on both appliances – but do not begin configuration. Select only one of the two appliances from which you will perform configuration; the choice is arbitrary. This will be referred to as the primary appliance for configuration purposes. Connect to and access the serial console of that appliance, and perform the initial tty-based configuration on it in the same manner as you would when configuring a standalone appliance. Note: Do not perform the initial ttybased configuration on the secondary appliance; it will be automatically configured for you during cluster setup. Etc.
References: https://docs.oracle.com/cd/E51475_01/html/E52872/godjv.html
Download Printable PDF. VALID exam to help you PASS.
|
|