What command would be used to configure the interface eth1:1 with the IP address 10 10.34 and the netmask 255.255.255.0?
A. ifconfig eth1:1 10.10.3.4 netmask 255.255.255.0 start
B. ifconfig 10.10.3.4 netmask 255.255.255.0 eth1:1 up
C. ifconfig eth1:1 10.10.3.4 netmask 255.255.255.0 up
D. ifconfig 10.10.3.4/255.255.255.0 eth1:1 up
E. ifconfig eth1:1 10.10.3.4/255.255.255.0 up
The IP-address is no IP-address and should be as follows instead:
“10.10.3.4”