The AIX hosts node1 and node2 have Ethernet adapters, both named ent0, configured on the same network. Both are dedicated physical 1GB adapter ports in a Host Ethernet Adapter. Based on this information and the output shown for each node, what is the most likely cause of intermittent failures and slow communication between these adapters?
A. The jumbo_frarnes setting is ‘no’ and should be set to ‘yes’.
B. The Multi-Core Scaling mode is enabled. Multi-Core Scaling is interfering with communications because the processor is too busy.
C. The Shared Ethernet Adapter does not have enough bandwidth to accommodate the network traffic.
D. The media speed is set differently on the adapters than the endpoints on the switch.
|
Download Printable PDF. VALID exam to help you PASS. |
 |