Click the Exhibit button.
user@host> show interfaces ge-0/0/7.0 extensive
Logical interface ge-0/0/7.0 (Index 76) (SNMP ifIndex 548) (Generation 141)
…
Security: Zone: log
Allowed host-inbound traffic : bootp dns dhcp finger ftp tftp ident-reset http https ike netconf ping reverse-telnet reverse-ssh rloqin rpm rsh snmp snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl lsping ntp sip
r2cp
Flow Statistics:
Flow Input statistics:
Self packets: 0
ICMP packets: 0
VPN packets: 0
Multicast packets: 0
Bytes permitted by policy: 0
Connections established: 0
Flow Output statistics:
Multicast packets: 0
Bytes permitted by policy: 0
Flow error statistics (Packets dropped due to):
Address spoofing: 0
Authentication failed: 0
Incoming NAT errors: 0
Invalid zone received packet: 0
Multiple user authentications: 0
Multiple incoming NAT: 0
No parent for a gate: 0
No one interested in self pakets: 0
No minor session: 0
No more sessions: 589723
No NAT gate: 0
No route present: 0
No SA for incoming SPI: 0
No tunnel found: 0
No session for a gate: 0
No zone or NULL zone binding 0
Policy denied: 0
Security association not active: 0
TCP sequence number out of window: 0
Syn-attack protection: 0
User authentication errors: 0
Protocol inet, MTU: 1500, Generation: 1685, Route table: 0
Flags: Sendbcast-pkt-to-re
Addresses, F1ags: Is-Preferred Is-Primary
Destination: 10.5.123/24, Local: 10.5.123.3, Broadcast:
10.5.123.255, Generation: 156
Protocol multiservice, MTU: Unlimited, Generation: 1686, Route table: 0
Policer: Input: __default_arp_policer__
…
…
An SRX Series device has been configured with a logical system LSYS1. One of the BGP peers is down.
Referring to the exhibit, which statement explains this problem?
A. The LSYS license only allows up to ten BGP peerings.
B. The maximum number of allowed flows is set to low.
C. The allocated memory is not sufficient for this LSYS.
D. The minimum number of flows is set to high.
|
Download Printable PDF. VALID exam to help you PASS. |
 |