Which address is an IPv4 Broadcast address?
Which address is an IPv4 Broadcast address? A. 10.0.0.255/16 B. 172.16.255.0/23 C. 192.168.0.3/30 D. 224.0.0.3/8
Which address is an IPv4 Broadcast address? A. 10.0.0.255/16 B. 172.16.255.0/23 C. 192.168.0.3/30 D. 224.0.0.3/8
A technician needs to create multiple subnets to make sure there are at least 20 available IP addresses per subnet. Which three subnets meet the requirements for the 172.21.254.0/25 network? A. 172.21.254.48/27172.21.254.48/27 172.21.254.0/27 B. 172.21.254.64/27172.21.254.0/27 172.21.254.96/27 C. 172.21.254.16/27 172.21.254.64/27 172.21.254.96/27…
Refer to the exhibit. A technician is troubleshooting IP connectivity between two servers connected to the same N3024 switch. Server 1 is configured with a gateway of 192.168.1.1 and can ping its gateway Server 2 is configured with gateway of…
Which two subnet masks should be used to achieve a network increment of 4? A. /28 255.255.255.252 B. /29 255.255.255.254 C. /30 255.255.255.252 D. /30 255.255.255.254
A technician applies an IPv4 address to the Out-Of-Band/Management port of a Dell N-Series switch. Which step allows the technician to use the web interface? A. Update the Switch Firmware to at least version 6.3.x.x. B. use the default Dell…
A technician has one stack of three N3024. The technician removes the master unit without powering off the stack. This unit is reconfigured with new IP address in the same Layer 2 network. Which management issue is the result? A.…
A technician is using Telnet to access an N2024P. Connections are being terminated after 10 minutes of inactivity. Which action should the technician perform to extend the amount of allowed inactivity time? A. console(config)#line telnet console(config-telnet)#exec-timeout 150 0 B. console(config)#line…
Refer to the output. Which two actions occur if interface Tw2/0/2 goes down? (Choose two.) A. Switch 1 becomes a standalone switch. B. Switch 2 remains in the stack. C. Switch 2 becomes a standalone switch. D. Switch 3 remains…
Which command shows active telnet sessions on Dell N-Series switches? A. Show hosts B. Show sessions C. Show users accounts D. Show line telnet
Refer to the output: A network outage occurs. A technician tries to log in to a switch by Telnet using the correct local username and password. What is causing the login failure? A. Authentication is not enabled on Telnet. B.…