A technician wants to allow SSH connections to authenticate using an external server. If the external server becomes unreachable, the users created on the switch should be allowed. What command will accomplish this goal? A. AAA authentication login default radius…
Which three services use UDP for data segment transportation? (Choose three.) A. DHCP B. TFTP C. SMTP D. HTTP E. RIP F. FTP
A client must connect a printer located on a public area on an X1000. The client is concerned someone will use the printer Ethernet cable to gain unauthorized network access. Which configuration will help prevent unauthorized accesses? A. Enable Port…
A Dell Networking N-Series switch is directly connected to a wireless Access Point that requires access to VLANs 1, 10, and 20 configured on the switch. Which two Port VLAN Modes can be used to meet the VLAN requirements? (Choose…
A technician decides to create an ACL. The technician includes all host and/or protocols allowed within the ACL. Why must the technician take this step? A. The ACL will require comments. B. The ACL will malfunction without a certain number…
A client needs to allow Telnet traffic from the 192.168.1.0/25 network. The client needs to configure the "permit" statement in the ACL. Which command will accomplish this goal? A. console(config-ip-acl)#permit tcp 192.168.1.0 255.255.255.128 any eq 23 B. console(config-ip-acl)#permit tcp 192.168.1.0…
Refer to the output. A technician implements a new N-Series switch and connects it to another N-Series switch with OSPF already configured. The OSPF neighbor does not show up after 5 minutes of waiting. What is causing the issue? A.…
Refer to the output shown: Which two statements describe the state of configuration of interfaces gi1/0/1-24? (Choose two.) A. The interfaces are administratively Down. B. Spanning tree is NOT blocking any interfaces. C. The interfaces have negotiated to mode trunk.…
A technician implements a new copper connection to Gi2/0/20. Which command should be used to check the cable length? A. test tdr copper-length gigabitethernet 2/0/20 B. test copper-length tdr gigabitethernet 2/0/20 C. test tdr copper-port gigabitethernet 2/0/20 D. test copper-port…
Refer to the output: console#show interfaces switchport gigabitethernet 1/0/5 Port: Gi1/0/5 VLAN Membership Mode: Access Mode Access Mode VLAN: 3 General Mode PVID: 1 (default) General Mode Ingress Filtering: Enabled General Mode Acceptable Frame Type: Admit All General Mode Dynamically…