A technician is creating a virtual disk in the DRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016. They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard. Only the first…
A server is equipped with 2 CPUs and 12x 8 GB DIMMs, for a total of 96 GB. The OS is not seeing all the memory. Which memory mode should be configured so that all memory is seen by the…
A technician needs to set a server to always attempt PXE boot before booting to the hard drive. What actions does the technician need to take to achieve this? A. Change the Boot Sequence so the network card is first…
A user has a fully configured PowerEdge R640 and an iSM installed on their Windows 2016 operating system. They now want to install OMSA to enable them to have alerts sent out in-Band to a management console. What does the…
A technician receives a repurposed PowerEdge server. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so. The default account has been disabled. What method can be used to enable the default…
A technician is installing a new server and is not getting any link lights on the iDRAC management port. They have verified that the cable and switch port are working. What could be causing this issue? A. iDRAC has an…
What can a technician do to ensure that no malicious code can be introduced into any of the servers through physical access? A. Set USB 3.0 to disabled B. Set Secure Boot Policy to enabled C. Set User Accessible Ports…
A technician needs to install the OS on a server remotely using iDRAC. What is the minimum iDRAC license required to perform this task? A. Express B. Enterprise C. Basic D. Baseboard Management Controller
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They also create a global hot spare. A drive fails on the second virtual disk. What is the result? A. Dedicated hot spare for…
A technician needs to replace a server component with orange tabs/releases. Which set of paired steps should the technician take to complete this task? A. Power off the server Apply anti-static procedures B. Remove power cables Cold swap the component…