A customer using a FAS9000 needs to perform a takeover, but their system indicates that a takeover is not possible. You have the customer execute the storage failover show -instance -node nodeb command with the resulting message, “Takeover Not Possible: NVRAM log not synchronized".
In this scenario, what would you do to solve the problem?
A. Verify that the interconnect cables are connected correctly between the nodes and verify the interconnect links status by using the cluster show -instance command.
B. Reboot each node to correct the problem, and then rerun the command to verify that the problem has corrected itself. If the problem still exists, reseat the controller module.
C. Verify that the interconnect cables are connected correctly between the nodes and verify the interconnect links status by using the storage failover show -instance command.
D. Power off the node manually to force a takeover and reseat the controller module. When the system comes back up, rerun the command to see if it the problem still exists.
|
Download Printable PDF. VALID exam to help you PASS. |
 |