What does the Cisco SLM define as the component used to specify expected performance between a pair of devices connected by a network?
A. CM
B. SLC
C. SLA
D. SAA
What does the Cisco SLM define as the component used to specify expected performance between a pair of devices connected by a network?
A. CM
B. SLC
C. SLA
D. SAA
Synthetic loss measurement (SLM) is part of the ITU-T Y.1731 standard. It can be used to periodically measure Frame Loss and Forward Loss Ratio (FLR) between a pair of point to point MEPs. Measurements are made between two MEPs that belong to the same domain and MA.
Configuring an SLM
To configure an SLM, execute the following commands:
SUMMARY STEPS
1. enable
2. configure terminal operation number
3. ip sla operation number
4. ethernet y1731 loss SLM domain domain-name {evc evc-id | vlan vlan-id}{mpid target-mp-id | mac-address-target -address}cos cos{source{mpid source-mp-id | mac-address source-address}}
5. aggregate interval seconds
6. availability algorithm{ sliding-window | static-window 1} symmetric
7. frame consecutive value
8. frame interval milliseconds
9. framesize bytes
10. history interval intervals-stored
11. owner owner-id
12. exit
13. exit
14. ip sla reaction-configuration operation-number [react {unavailableDS |unavailableSD | loss-ratioDS | loss-ratioSD} ] [threshold-type {average [number -of-measurements] | consecutive [occurences] | immediate} ] [threshold-value upper -threshold lower-threshold]
15. ip sla logging traps
16. exit
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ipsla/sla-xe-3s-book-asr920/sla-config-slm-over-vpls.html