Home » HP » HP2-Z12 » What is one difference?
You have installed a replacement Wireless Unified LAN Controller A3000G, and you now need to access its management interface. Managing this controller is similar but not identical to managing HP A Series switches. What is one difference?
A. At factory default settings, you can reach the controller’s Web browser interface at the default IP address 192.168.0.100.
B. The controller does not provide a console port, so you must access the CLI using Telnet or Secure Shell (SSH).
C. The controller supports only one level of management access instead of four.
D. The controller does not support a backup startup-config.
Correct Answer: A
Explanation/Reference:
Module 14 — Basic Configuration of HP A Series Wireless Products
New WLAN Access Controller
If you are installing a new WLAN access controller, you can access the controller in one of the following ways:
By using the default settings to access the Web browser interface
By establishing a console session.
Web Browser Interface
Unlike the A Series switches, the WLAN access controllers support management access through a Web browser by default. You can connect your management workstation directly to a switch port on the controller and configure your workstation to use an IP address in the same subnet as the controller’s default address, which is 192.168.0.100/24.
|
Download Printable PDF. VALID exam to help you PASS.
|
 |
