Which two values are needed to run the APIC-EM ACL Analysis tool? (Choose two.)
A. destination port
B. source address
C. protocol
D. source port
E. periodic refresh interval
F. destination address
Which two values are needed to run the APIC-EM ACL Analysis tool?
Straight from Cisco as Jack said B.) and F.) is what it should be.
Before You Begin APIC-EM ACL Path Trace:
Make sure that you have devices in your inventory. If not, discover devices using the Discovery function.
Ensure that the controller has SSH or Telnet access to the devices.
Step 1 In the Navigation pane, click Path Trace.
Step 2 From the path trace toolbar, click Start new Path Trace.
Step 3 In the Source field, enter the IP address of the host or the Layer 3 forwarding interface where you want the trace to start.
If you enter the device IP address manually, you need to select the device from the list and then the interfaces for that device.
Step 4 In the Destination field, enter the IP address of the host or Layer 3 forwarding interface where you want the trace to end. You can also enter an IP address of an unmanaged device (called an unknown destination).
If you enter the device IP address manually, you need to select the device from the list and then the interfaces for that device.
Step 5 (Optional)To configure source and destination ports or protocols, click More Options.
Step 6 (Optional)In the Source Port field, enter the port number of the host where you want the trace to end.
Step 7 (Optional)In the Destination Port field, enter the port number of the host where you want the trace to end.
Step 8 (Optional)In the Protocol field, choose tcp or udp from the drop-down menu for the Layer 4 path trace protocol.
Step 9 (Optional)To configure the path trace to refresh every 30 seconds, check the Periodic Refresh (30 sec) check box.
Step 10 (Optional)To configure the path trace to collect additonal statistics, check the Stats check box and any of the following check boxes, as desired:
QoS—Collects and displays information about quality of service.
Interface—Collects and displays information about the interfaces on the devices along the path.
Device—Collects and displays information, such as a device’s CPU and memory usage.
Perf Mon—Collects and displays performance monitoring information about the devices along the path.
Note
When you choose the Perf Mon option, APIC-EM enables performance monitoring configuration for all of the flows on the devices in the path. To proceed, you need to confirm this configuration.
Step 11 (Optional)Select the ACL Trace check box to run an ACL-based path trace.
Step 12 Click Start Trace.
i think the answer are B & F
I think the option is B & F, source address & destination address.
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/application-policy-infrastructure-controller-enterprise-module/1-4-x/path_trace/user-guide/b_Cisco_Path_Trace_User_Guide_1_4_0_x/b_Cisco_Path_Trace_Solution_Guide_1_4_0_x_chapter_011.html
**source port and destination port are optional.
I think the answer for this will Source address and Destination Address. Source port and destination ports are optional.