A wireless engineer is doing a pre-site survey. Which two attributes must match between the site survey and the production clients? (Choose two.) A. AP type B. radio frequency C. mobility patterns D. user E. exact location
A network engineer is retrofitting an existing building wired with Category 5e with AP 3800 and mGig switches. Which cable length allows for 5G operation? A. 70 m B. 120 m C. 130 m D. 150 m
While evaluating a post-installation WLAN deployment, problems are occurring when a client roams from one AP to another. The client bounces back and forth between APs. Which two items can be checked to resolve this issue? (Choose two.) A. Check…
Which design limitation of dual-band WLAN must be considered when end-user devices stream real-time applications and services utilizing dual-band SSID? A. It can cause packet loss in the real-time path B. It can cause jitter and degrade overall network throughput…
An engineer is performing a predictive RF design of a typical office environment. Which value is the most likely attenuation of a cubical wall for this environment? A. 2 dBi B. 12 dBd C. 1 dB D. 12 mW
What is the minimum RSSI signal for a data WLAN? A. -65 dBm B. -67 dBm C. -72 dBm D. -80 dBm
What is the Cisco-recommended cell overlap percentage for a typical RToWLAN network design? A. 5 to 10 B. at least 20 C. a maximum of 20 D. at least 50
When a post-installation audit is performed using the Ekahau Survey tool, which two steps are associated with the passive portion of the audit? (Choose two.) A. Check to see if the signal levels on other access points that are heard…
Which two modifications to station behaviors were designed in the IEEE 802.11e protocol? (Choose two.) A. CFP B. HCCA C. EDCA D. PCF E. DCF
You are designing a network deployment for a state college. The college has six buildings. Each building has a WLC located in the IDF to support access points. Which type of wireless architecture does the deployment represent? A. centralized B.…